Sabbin Zana Fim ɗin PVC Mai Rufaffen Karfe Core Skin
Bayanin Samfura
Molded kofa panel yana nufin yin amfani da matsakaicin yawa allon (MDF) ko high yawa allon (HDF) a matsayin tushe abu, da kuma surface an yi ado da na halitta m itace veneer kamar ash, black gyada, pear da sapele, ko tare da melamine. takarda, ko a'a Duk wani nau'in veneer da fata, ƙananan carbon, abokantaka na muhalli, kyakkyawa, dacewa, maras fashewa, ɗakunan ƙofofi marasa lahani da injin gyare-gyaren gyare-gyare mai girma-tonnage ya samar a cikin babban zafin jiki, matsa lamba mai girma da kuma high- yanayin zafi ta amfani da fasahar "gyare-gyaren lokaci ɗaya" ko "fasaha na lokaci biyu".Babban ingancin gyare-gyaren ƙofofin ƙofa suna da alaƙa da injin ƙirar, tsarin samarwa, ingancin takarda, ingancin fata, ingancin manne, ingancin ma'aikata da ka'idodin dubawa.Ƙofar da aka ƙera za su iya taimaka wa yawancin masana'antun ƙofa na katako don cimma "samar da layin taro da ci gaban muhalli", wanda shine yanayin gabaɗaya na masana'antar ƙofa ta katako a duniya, kuma masana'antun ƙofa na katako sun zaɓe kuma suna fifita su.Halayen lalacewa.
1. Kayan abu yana da kyau, aikin fasaha yana da kyau, kuma siffar ya cika.
2. Samfurin yana da dorewa mai kyau, tabbatar da danshi kuma ba sauki don lalata ba.
3. Ƙarfin ƙusa yana da kyau, kuma ana iya haɗa shi da amfani da shi akai-akai.
4. Matsayin darajar muhalli.
5. Babban daraja, kyakkyawa kuma mai amfani.
| Raw kayan | Galvanized/sanyi birgima |
| Launi | Keɓance |
| Kauri | 0.4-1.6 mm |
| Ƙayyadaddun bayanai | DC01, DC02, DC03... |
| Biya | L/C,D/A,D/P,T/T,Western Union |
| Lokacin bayarwa | 15-20 kwanaki bayan karbar prepayment |
| Sufuri | Jirgin ruwan teku |
| MOQ | 1200-1600pcs (1 ganga) |
| Kunshin | Iron tire (300pcs) |
FAQ
Q1: Menene kewayon kauri na takardar karfe, za a iya daidaita shi?
Amsa: A al'ada, kauri daga cikin baƙin ƙarfe takardar ne 0.3-2.0mm, kuma shi ma za a iya musamman bisa ga abokin ciniki ta request.
Q2: An gyara girman takardar ƙarfe?
Amsa: Za'a iya yanke girman daidai gwargwadon girman da abokin ciniki ke buƙata, madaidaicin zai iya kaiwa 0.01mm.
Q3: Menene haƙurin takardar Karfe?
Amsa: Haƙuri na takardar karfe shine ± 0.025mm
Q4: Menene marufi kamar lokacin da kuka isar da kaya? Za ku iya kare samfurin daga karce?
Amsa: za mu yi amfani da mdf jirgin don raba bayarwa, don tabbatar da cewa samfurin surface ba zai haifar da karce.
Q5: Yaya ya kamata a tsaftace datti a lokacin amfani?
Amsa:
A. Idan kawai saman kofa yana da datti don mannewa, sannan a shafa da ruwan sabulu.
B. Idan kana son cire alamar ko tef ɗin a ƙofar, zaka iya shafa shi da ruwan dumi sannan da barasa.
C. Idan akwai datti kamar tabon mai a saman, ana iya shafa shi kai tsaye da kyalle mai laushi sannan a wanke shi da maganin ammonia.
D. Akwai layukan bakan gizo a saman kofa, wanda mai yiwuwa ne saboda yawan mai ko wanka.Kurkura da ruwan dumi.
E. Idan akwai tsatsa a saman, za'a iya tsaftace shi da 10% nitric acid, ko tare da maganin kulawa na musamman F. Dole ne phosphating kafin a cika shi.
Q6: Yaya tsawon lokacin bayarwa?
Amsa:15-20 kwanaki bisa ga alamu da girman da kuka yi oda.
